POWERSHIELD Commander 2000VA Line Interactive Tower UPS

POWERSHIELD Commander 2000VA Line Interactive Tower UPS

CIPS Electronics

  • $2,039.00
    Unit price per 
Tax included. Shipping calculated at checkout.

POWERSHIELD Commander 2000VA Line Interactive Tower UPS. Delivers Automatic Emergency AC Power Generated from Internal DC Batteries. Tower case UPS with Backlit LCD. Pure Sine Wave Output.

The PowerShield Commander is a sophisticated pure sine wave, line interactive UPS. On top of featuring Automatic Voltage Regulation (AVR), it provides a Pure Sine Wave output while in backup mode. This UPS is a cost-effective solution for protecting applications such as networking, telecom, security and motors.



  • Pure Sine Wave Output
  • Output Power Factor 0.9
  • Free Programmable Power Management
  • Ultra Modern, Informative LCD – Shows Battery Time Remaining
  • ECO Mode
  • Smart AVR
  • Emergency Power Off Function
  • Multiple Communication Available with Faster SNMP Card

Capacity 2000VA/1800WTopology Line Interactive, Pure Sine WaveINPUTNominal Voltage240V ACAcceptable Voltage Range162-290V ACFrequency50/60Hz ±5Hz (auto sensing)OUTPUTVoltage Regulation (AC Mode)240V AC (Selectable 208/220/230V AC) ±10% AVRVoltage Regulation (Batt. Mode)± 1.5% (before battery alarm)Frequency Range (Batt. Mode)50Hz or 60Hz ±1HzCurrent Crest Ratio3.1Total Harmonic Distortion2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)Transfer Time6ms (Typical), 10ms max.Waveform (Batt. Mode)Pure Sine WaveEFFICIENCYAC Mode98% (Advanced ECO design)Battery Mode91%BATTERY Standard ModelBattery Type & Number: 12V/9AH (x4)
Recharge Time: 4 hours recover to 90% capacityPROTECTIONFull ProtectionOverload, thermal, short circuit, discharge and overcharge protectionSurge Protection1968J/39000AENVIRONMENTOperation Temperature0°C~40°CRelative Humidity0%~90% (RH non-condensing)Noise Level<45dBCOMMUNICATIONS & MANAGEMENTInterfaceUSB and RS-232 as standard, an Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contactSoftwarePowerShield NetGuard® software - supports Windows-based operating system, Linux, Unix and MacLCD displayAC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining Audible alarmBattery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, OverloadPHYSICALDimensions (D x W x H) 455 x 145 x 220mmWeight20.5/22.5kgCOMPLIANCESafetyEN62040-1 -1 2003, IEC 60950-1 -1 EMCEN62040-2 2006RoHS Directive 2011/65/EU